Startrite 350mm Cold Saw - CP350SA Semi-Auto Production Saw - Pneumatic Vise

350mm Startrite Semi-Automatic Cold Saw

Model: CP350SA | Blade Size: 14" (350mm) | Type: Semi-Automatic Circular Cold Saw

Overview

The Startrite CP350SA is a robust, high-precision semi-automatic cold saw designed for the clean, square cutting of ferrous and non-ferrous metals. The "Semi-Automatic" designation refers to its pneumatic/hydraulic control system: with a single press of the foot switch or button, the vise clamps the material, the blade starts and descends at a controlled rate, and then retracts to the home position after the cut is complete.

This machine is ideal for production environments where burr-free, "milling-quality" cuts are required on tubes, pipes, and solid profiles. Unlike abrasive saws, this cold saw utilizes a slow-speed HSS blade and high-volume coolant to prevent heat buildup, ensuring the metallurgical integrity of the workpiece remains intact.

Technical Specifications

• Blade Diameter: 14" (350mm)
• Cutting Capacity (90° Round): Approx. 4.5"
• Cutting Capacity (90° Square): Approx. 4.0" x 4.0"
• Mitering Capability: 45° Left / 45° Right (Swivel Head)
• Motor Power: 2-Speed Motor (Approx. 2.5 HP / 3 HP)
• Blade Speeds: 2-Speed (Typically 40 / 80 RPM for steel and stainless)
• Vise Operation: Pneumatic Dual-Clamping (Self-Centering)
• Coolant System: Integrated pump and reservoir
• Electrics: 440V | 3-Phase | 60Hz
• Weight: Approx. 650 – 750 lbs

Key Features

• Semi-Automatic Cycle: Increases productivity and reduces operator fatigue by automating the clamping and stroke process.
• Dual Clamping Vise: Holds the material on both sides of the blade to ensure a burr-free cut and prevent the blade from binding at the end of the stroke.
• Oil-Bath Reduction Gearbox: Heavy-duty drivetrain ensures consistent torque and vibration-free cutting, leading to significantly longer blade life.
• Precision Mitering: The head swivels easily to 45° with positive mechanical stops, allowing for fast and accurate setup for frame and angle work.
• Cast Iron Construction: The massive saw head and base provide the rigidity necessary to maintain a squareness tolerance of ±.002" per diameter inch.