50 HP Goulds 3196 8x10-15G ANSI Pump | 316 Stainless Steel | 1700 GPM | S/N 200C073

Goulds 3196 8x10-15G ANSI Process Pump | 50 HP | 316 Stainless Steel

The Goulds 3196 is the global benchmark for ANSI B73.1 process pumps. This 8x10-15G model is a high-capacity workhorse, featuring a 316 Stainless Steel (316SS) wet end for maximum resistance to corrosive chemicals and industrial solvents. Powered by a 50 HP motor and rated for approximately 1,700 GPM, it is ideally suited for primary plant intake, bulk chemical transfer, and large-scale industrial fluid circulation.

Built on the extra-large XL power frame, this pump (S/N 200C073) is engineered to handle the high radial loads associated with a 15-inch impeller. The design features Goulds' "back pull-out" capability, allowing the rotating assembly to be serviced without disturbing the system piping, and an external impeller adjustment to maintain peak hydraulic efficiency over years of service.

Technical Specifications

• Manufacturer: Goulds Pumps (ITT)
• Model: 3196 (ANSI B73.1)
• Size: 8x10-15G (10" Suction, 8" Discharge)
• Serial Number: 200C073
• Year of Manufacture: 1990
• Material: 316 Stainless Steel (316SS)
• Motor: 50 HP 3-Phase Induction
• Flow Rate: ~1,700 GPM
• Power Frame: XL (Extra-Large)
• Max Impeller: 15"

Key Features

• Industrial Durability: Constructed from heavy-walled 316SS, providing a significant corrosion allowance and superior structural integrity compared to modern thin-cast alternatives.
• XL Power Frame: Optimized bearing housing and shaft design to minimize deflection, extending the life of both the mechanical seal and the bearings.
• Serviceability: The external impeller adjustment allows for clearance restoration in minutes, maintaining factory-level performance without a full pump teardown.
• ANSI Standardization: Fully interchangeable with any standard 8x10-15 ANSI piping configuration, making it a perfect "drop-in" replacement or mission-critical spare.